NA-525 Harrison, NY, PD Command Vehicle


This vehicle interior was built in partnership with one of our New York dealers.  It has several custom features all required by the department.  Just a few features include Custom built desk with storage for water, a refrigerator, coffee maker and microwave oven. Two Heavy Duty overhead cabinets feature Lexon sliding doors.  A sound and heat insulated generator compartment and a specially designed dry marker board with map holder in built in.  The unit also has a custom built dining table for four. 

NA-101+GC Dobbs Ferry, NY, PD Supervisor’s Vehicle


48W x 44D x 18H for Ford Explorer or 48W x 40D x 18H for Chevy Tahoe.  A low profile 2 drawer gun and ammo storage unit.  Rubber backed Marine carpeting, glued in place with waterproof adhesive on top & interior of drawers.  Removable drawer dividers are standard.  All combination locks now come with key override, standard.

NA-045 Greenwich, CT PD  Supervisor’s Support Vehicle


48W x 44D x 18H for Ford Explorer or 48W x 40D x 18H for Chevy Tahoe.  A two (2) drawer cabinet with heavy duty ¾” ball bearing slide capacity of 200#’s each with 100% extension.  Adjustable dividers in each drawer as well as the interior sprayed with Kevlar enhanced TrueGuard for severe service applications.  Another inexpensive way to organize and safely secure equipment.

NA-040 PD Demo


48W x 44D x 18H for Ford Explorer or 48W x 40D x 18H for Chevy Tahoe.  A 2 drawer unit with dividers in each.  A combination lock with key override.  Standard height sides with high center partition for mounting tools.  Top and partition covered with Kevlar enhanced TrueGuard spray.  An inexpensive way to organize and safely secure equipment, hand guns and ammo.

NA-022 Pleasantville, NY PD  Supervisor’s Support Vehicle


44W x 40D x 28H for Ford Explorer.  Rubber backed Marine carpet top, 3 writing surfaces on flip up, high mount command board with underneath storage, 2 each tool and ammo drawers, both coated inside with Kevlar reinforced TrueGuard spray and 1 Combo locking, marine carpeted gun drawer.

NA-011 Beach Wood, OH PD   Chief’s Custom Designed Command 


48W x 44D x 21H  for Ford Expedition.  TrueGuard wear surfaces top, 3 writing surfaces on flip up command board with underneath storage, 2 administration drawers and 2 duffle bag areas with custom straps for securing.

NA-008 Greenburgh, NY PD “Fast Car” 


Custom Built, vented drug vault for PD Medical Response to fit Chevy, Tahoe.  Customer specified dimensions: 47W x 66D x 27H  (2nd. Row seats removed).  Access to forward storage areas through rear passenger doors.  Single unit construction.

NA-007 Greenburg, NY PD “Fast Car” 


Custom Built, vented drug vault for PD Medical Response to fit Chevy, Suburban.  Customer specified dimensions: 47W x 66D x 27H  (2nd. Row seats removed).  Access to forward street side storage areas is through rear passenger doors.  “L-design” for removal of 60% of 2nd row seat...  Center of cabinet is perpendicular storage for one fold up back board.

NA-005 Harrison, NY PD  SWAT Support & Command Vehicle.  


1 of 3 Cabinets in this special vocational Chevy Avalanche.  Dual drawers offer up to 60 inch ball bearing slides.  Center, reinforced “T” mounting board for HD tools & equipment.

For additional photos, see Specialty Projects

Click Photos to Enlarge

Click Photos to Enlarge

Click Photos to Enlarge

Click Photos to Enlarge

Click Photos to Enlarge

Click Photos to Enlarge

NA-667 Ohio Department of Natural Resources (Watercraft Division) Custom Designed, Secure Gun & Equipment Cabinet.


A perfect application for our poly coated plywood with double sealed edges.  This is truly custom built to fit a rugged application and the customers’ needs.  Stapled together cabinets just couldn’t survive.

NA-080 Mamaroneck, NY PD Officers Command Vehicle


48W x 44D x 26H for Ford Explorer or 48W x 40D x 26H for Chevy Tahoe.  A flip up Command Board and administration drawer with file tub and removable poly desk top...  Sprayed top & rear (behind 2nd row seat) with Kevlar enhanced TrueGuard.  This unique design has a special radio head mounting area with a second storage area for books or radio & electronics power unit mounting (as shown).











truetechusa

truetechusa

The New Advantage New Advantage Command Cabinets are manufactured using the finest and most durable materials. Units are custom designed to fit any SUV or Van and to the needs of the customers equipment or requirements. Framed with polyester laminated marine grade and HDO plywood manufactured in the U.S.A. Wear surfaces are coated with Kevlar reinforced TrueGuard or rubber-backed marine carpeting. Interior and exterior drawer edges trimmed with black PVC T-molding. Drawer exterior faces and doors are lightly textured High Density Polyethylene. All drawers have stainless steel ball bearing slides. The highest quality latches and hardware used in Emergency Vehicles are standard. It is our mission to provide our customers the very best in quality craftsmanship, world class American Made materials, when possible, and above all treat our customers even better then we expect to be treated in any business transaction. We believe that Service starts when you call our number. And don’t worry about pushing any buttons, we speak English here. We pledge to get back to any missed calls within 4 hours. We founded New Advantage Command Cabinet Systems nearly 10 years ago because dealers and vehicle outfitters came to TrueTech USA, Ltd. and asked us to find a quality cabinet maker. They were tired of buying from unscrupulous vendors that would give them a quote for a cabinet then take the lead and bid it direct to the end user department. Then there were the quality issues of bare wood, MDO and saw dust boards, stapled together and covered in cheap carpeting held in place with contact cement that covered up poor fit and finish. The plastic trim would crack in cold weather, the carpet would fray and tear loose at the edges and if the carpet got wet it would stink while some substrates would warp, buckle and delaminate. Some manufactures didn’t even use drawer slides which meant you had to slide the drawer on its bottom like an old chest with drawers. When you put a load in the drawer you had to have two handles to pull it open and a good hip budge to push it back in. Vehicle vibrations would shake some apart while others sagged so badly you couldn’t pull the drawers open. Some even used Chinese plywood that gave off a sickening odor that lingered for months in a vehicle. Steel cabinets answered many of these issues but they are limited to fixed designs, rattles and have to be made in sufficient quantities to make them financially feasible.
Back to Top

NA-GC102 Weapon Cabinet (SWAT)


Total custom design to fit customer's equipment requirements. Vault holds four (4) AR-15 rifles in carrying bag with ammo clips. Left open compartment holds full SWAT armored vests. Note: Custom door panel. Rear of vehicle on front cover. 

Police Products

NA-150+GC Dobbs Ferry, NY, PD, Command & SWAT Support


28W x 44D x 30H for Ford Explorer Street and curb side storage and gun lock.  This is how you put 60 lbs of equipment in a 5lb box.  Traditional gun locked drawer won’t work in side door cabinets.  So, use a roll-up door.  This design allows for 4 long guns in carpeted divider area and 2 SR-15’s w/folding stocks to be mounted on each adjacent wall.  Curb side allows for equipment and duffle bag secured storage.

NA-041 New Milford, NY PD  Supervisor’s Support Vehicle


48W x 44D x 18H for Ford Explorer or 48W x 40D x 18H  for Chevy Tahoe.  A 2 drawer with Command Board, and high sides.  Top covered with Kevlar enhanced TrueGuard spray.  An inexpensive way to organize and safely secure equipment.

Click Photos to Enlarge

Click Photos to Enlarge

Click Photos to Enlarge

Click Photos to Enlarge

Click Photos to Enlarge

Click Photos to Enlarge

NA-098 Mt. Vernon, NY PD Supervisor’s Support Vehicle


48W x 44D x 31.75H for Ford Explorer or 48W x 40D x 31.75H for Chevy Tahoe.  Note:  This highly technical computer command cabinet system is exactly what New Advantage Command Systems is all about.  A 4 drawer system that includes a Flip-up Command Board, File Drawer with removable tub, 1 miscellaneous administrative drawer, a computer docking station drawer with flip down front face for easy keyboard access, a pull out flat screen mounting surface and a two radio head recessed mounting area with hide-a-way power unit storage.  Top covered with Kevlar enhanced TrueGuard spray.  This truly redefines the word custom.

NA-1010 New York City Metro Transit Authority, K9 Vehicle


A 48W x 13D x .75H Adapter plate is used to mount this unit (designed for the Ford Explorer) into the current Chevy Tahoe.  The unit dimensions are 39+W x 40D x 21 H which includes additional 6” side and 7” rear lips to secure top mounted equipment.  The two drawers have a weight capacity of 250 lbs each and feature the industries only “Lock Out Only” ¾” heavy duty slides.



**NEW NUMBER**
Phone: (330) 284-4402
Email - billtrue@truetechusa.com

Click Photos to Enlarge

Click Photos to Enlarge

NA-901 Cleveland Heights, OH Bomb Squad Vehicle


This vehicle interior was built in partnership with our Akron, OH dealer, Fallsway Equipment.  It has several custom features all required by the department.  Just a few features include 3 keyed alike bare wood interior drawers for explosives, a computer desk, several  reinforced shelves for heavy equipment, a sound and heat insulated generator compartment and a reinforced closet area for hanging bomb protection suits. 

Click Photos to Enlarge

For additional photos, see Specialty Projects

Click Photos to Enlarge

Veteran Owned

TrueTech USA Ltd.

Click Photos to Enlarge